From the classification of application environment, LED display can be divided into indoor LED display and outdoor LED display. Different application environments have different hardware and software requirements for LED display. Therefore, when we are doing indoor LED display rental, we cannot consider it from the perspective of renting outdoor LED displays, but should depend on the specific situation.
So what should you pay attention to when renting indoor LED displays?
1. Brightness
Brightness has a great impact on indoor LED display screens. Too high brightness can easily damage human vision and endanger human health. Too low brightness will cause the display image to be unclear. Generally speaking, the brightness of indoor LED display is 800cd/㎡-2000cd/㎡. Different brands of LED display products have different brightness.
2. Viewing angle
The size of the viewing angle of the LED display directly determines the audience of the LED display. The larger the viewing angle, the better, and the audience will be wider. The viewing angle is affected by the packaging method of the LED die. Therefore, when choosing an indoor LED rental screen, you should also pay attention to the packaging method of the die.
3. Flatness
The flatness of the display affects the quality of the displayed image. The flatness of the cabinet surface of indoor LED rental screens in the industry is kept within ±1mm. Partial protrusions or recesses on the surface of the cabinet will lead to a dead angle in the viewing angle of the display screen. The quality of flatness is determined by the production process, and LED display manufacturers should pay attention to this problem during production.
4. Color reproduction
The reproducibility of the display screen to color means that the color displayed on the display screen should be highly consistent with the color of the playback source, so as to ensure the realism of the image.
5. Dead Spot
The dead point of the LED display refers to a single point that appears on the display screen that is always bright or always black. The number of dead points is mainly determined by the quality of the die. The lower the dead point, the better the display effect will be.
