1. The LED display requires a solid power supply and good grounding maintenance. Do not use it in bad weather conditions, especially strong lightning weather. When cleaning the screen, wipe as lightly as possible to reduce damage. Turn off the LED display first, then turn off the computer.
2. Keep the LED full-color screen using the humidity of the environment, and prevent items with moisture properties from entering the LED full-color screen. Powering on the large screen of the LED full-color display with humidity will cause the display components to corrode and cause damage.
3. If water enters due to various reasons, please cut off the power immediately and contact the maintenance personnel until the screen display panel is dry before use.
4. The switching sequence of the LED display screen: first turn on the control computer to make it work normally, and then turn on the large screen of the LED full-color display screen.
5. Do not stay in full white, full red, full green, full blue and other full bright screen for a long time during playback, so as to avoid excessive current, excessive heating of the power cord, damage to the LED light, and affect the service life of the display.
6. Do not disassemble or splicing the screen at will.
7. The display screen is easy to become dirty when exposed to outside wind, sun, dust, etc. for a long time. After a period of time, the screen must be dusty. This needs to be cleaned in time to prevent the dust from wrapping the surface for a long time and affecting the viewing effect. maintenance work. The power supply should be stable and the grounding protection should be good. Do not use it in harsh environments, especially during lightning weather.
8. Alcohol can be used to wipe, or a brush or vacuum cleaner can be used to remove dust. Do not wipe directly with a damp cloth.
