1. Ceiling mounted
It is suitable for small screen area and light weight. The height of the screen body is generally less than 6 meters, and it can be directly hung on the load-bearing wall. Standard hangers can be used for indoor load-bearing concrete roof, and the length of hanger beam and hanger rod depends on site conditions. The indoor steel beams are hoisted with steel wire ropes, and the coat is decorated with steel pipes in the same color as the screen.
2. Inlaid
The inlaid structure is to open holes in the wall, and all the walls are inlaid in the wall. It adopts the front maintenance, and the display unit board is pasted on the frame structure with strong magnetic materials. The size of the hole is required to be consistent with the size of the outer frame of the LED display screen, and appropriate decoration should be made. In order to facilitate the maintenance of the hole on the wall, the hole must be through, otherwise the front disassembly mechanism must be used. Embedded installation is not conducive to the heat dissipation of the screen.
3. Ordinary hanging
It can be directly hung on the load-bearing wall, and the large area is generally used for post-maintenance, and the small screen is maintained before use without leaving maintenance space.
4. Swivel bracket hanging
It is suitable for display screens with a weight greater than 100kg and a screen height and width greater than 1200mm. It must be installed on a load-bearing wall. Because of its large area, it is difficult to disassemble and assemble, so the maintenance space can be solved by rotating the screen.
5. Floor-mounted installation
Floor-mounted installation is divided into two forms: fixed and movable. The movable installation with rollers is suitable for smaller and lighter displays.
6. Swing arm installation
The swing arm installation is mainly to facilitate the maintenance of the back of the screen and the heat dissipation of the screen. For swing arm installation, the structure of the frame should be designed according to parameters such as the area and weight of the screen. The swing wall can be designed to be movable or fixed.